Produced since more than 30 years from Oil source (Laurynlactam), PA12 is a techno-polymer used in high requirement applications…

POLYVINYLIDENEFLUORIDE – PVDF PVDF is a special plastic material, which belongs to the fluoropolymer category of products. It is generally used in applications requiring the highest purity, strength, and resistance to solvents and acids. It is commonly used in the…

POLYTETRAFLUOROETHYLENE – PTFE Created in 1938, PTFE is well known under the brand name TEFLON® from Dupont. Due to its properties, PTFE is often used as non-stick coating for pans and other cookware. It is an inert material, therefore it…

MULTILAYER C.MLT 533 C.MLT 533 tubes are produced using state-of-the-art multilayer extrusion technology. They fully comply with ISO 7628-2010 standards. C.MLT 533 tubes are offering are a very cost-effective alternative to PA12 or PA11 tubes. Developed for Airbrake application using…

POLYAMIDE 10.12 C.PRO C.PRO tubes are produced with a very innovative bio-sourced polymer named polyamide 1012 (PA1012). Developed to overcome PA12 and PA11 chronic shortage, C.PRO tubes comply fully with ISO 7628-2010 standard and fulfill the requirements of DIN 73378…

POLYAMIDE 11 C.BIO C.BIO tubes are produced using a fully bio-sourced polymer named Polyamide 11 (PA11). C.BIO tubes fulfill all requirements of the well-known standard DIN 73378 and DIN 74324. C.BIO tubes are mainly used in low temperature application below…

POLYAMIDE 12 C.BEST C.BEST tubes are made of Polyamide 12 (PA12), a polyvalent material, derived from petroleum. C.BEST tubes are fully compliant with DIN 73378 and DIN 74324 standards. C.BEST tubes combine excellent mechanical and chemical resistance from -40°C to…

In 2010, Castello Italia, has developed a proprietary copolymer with the scope to improve the mechanical and chemical properties of…

POLYETHYLENE Produced from an oil source (ethylene), PE is a commodity polymer used for cost sensitive application with low level of stress such as plastic waste bags, waste water tubes, packaging films, low pressure tubes (< 5bars). The Polyethylene family…

POLYURETHANE There are several types of thermoplastic Polyurethane (TPU)used for technical applications: Polyester based TPU Polyether based TPU Properties (mechanical and chemical) are quite different from each other. Polyether based TPU shows better hydrolysis resistance than Polyester TPU which allows…

Created in 1938, PTFE is well known under the name TEFLON® from Dupont. Because water and water-containing substances like most foods do not wet PTFE, adhesion to PTFE surfaces is inhibited. Due to this property PTFE is used as a…

POLYVINYLIDENE FLUORIDE – PVDF PVDF is a special plastic material in the fluoropolymer family. It is used generally in applications requiring the highest purity, strength, and resistance to solvents, acids, bases and heats thanks to low smoke generation during a…