PA 12 ATEX *

*Only available upon request

C.ESD tubes in Polyamide 12 have been developed using the latest nanotechnology in polymer engineering. This tube, antistatic and flexible, can be used in pneumatic and fluid transfer applications (ATEX):

Flammable fluids transfer
Pneumatic systems and tubes in explosive environments.

These tubes C.ESD could be classified ATEX II 2 G/D.

Cod.	Ø Ext.	Ø Int.	Thickness	Bend. Radius	Work. Press. 23°C	Burst press. 23°C	Spec. surface. res. ISO 3915	Col.*
								NR
T2A004002	4 mm	2,5 mm	0,75 mm	19 mm	9 bar	36 bar	10x10 Ohm³
T2A006004	6 mm	4 mm	1 mm	35 mm	22 bar	67 bar	10x10 Ohm³
T2A008006	8 mm	6 mm	1 mm	40 mm	16 bar	48 bar	10x10 Ohm³
T2A010008	10 mm	8 mm	1 mm	60 mm	12 bar	37 bar	10x10 Ohm³
T2A012010	12 mm	10 mm	1 mm	85 mm	10 bar	31 bar	10x10 Ohm³
*other colours subject to stock availability. For a minimum quantity Castello by ARaymond produces according to RAL chart (RAL table) or customer's requirements.

TOLERANCE
Tolerance on external diameter:

Ø Ext 4 mm - 8 mm: +/- 0,10 mm
Ø Ext 10 mm - 12 mm: +/- 0,15 mm

Upon request Castello by ARaymond can deliver tubes with higher precision tolerances.

MARKING
Standard marking is:

8x1 mm - PA HIPHL - C.ESD - ATEX II 2 G/D - 06002177 - 19 - 064 - 10:30:32

TEMPERATURE RANGE
From -60° C
to + 130° C

CHEMICAL RESISTANCE
Check the table

ROLL SIZE

0025	25 mt
0050	50 mt
0100	100 mt

Tolerance on roll length +/- 2%

PRESSURE VARIATION
As function of temperature

% PRESS.	TEMP
100%	23° C
87%	30° C
74%	40° C
64%	50° C
57%	60° C
52%	70° C
47%	80° C
44%	90° C
40%	100° C
36%	110° C
33%	120° C
30%	130° C

MATERIAL TECHNICAL DATA SHEET

Characteristic	Test Method	Unit	C.ESD
E Modulus	ISO 527	MPa	350
Tensile strength @ break	ISO 527	MPa	35
Elongation @ break	ISO 527	%	>50
Impact strength (+23°C)	ISO 179/2-1eU	KJ/m²	no break
Hardness Shore D	ISO 868	-	63

It is forbidden to use Castello by ARaymond tubes and coils in food and medical applications.